Translation of "пластина сопла" to English language:


  Dictionary Russian-English

пластина - перевод : пластина сопла - перевод : пластина - перевод :

  Examples (External sources, not reviewed)

Пластина
Head of set bolt or set screw
Пластина
completely deformed by welding
пластина
Section a a1
пластина
Inside view
Металлическая пластина
cap
Пластина петли
Head of bolt or screw
Металлическая пластина
REMARKS (reserved for the use of Competent Authorities)
Металлическая пластина
Stamp
Металлическая пластина
Ring and
пластина, моделирующая подошву ноги (30)
a sole plate (30)
Связываем сопла шариков в узел.
Tie the nozzles in one knot.
Я предпочитаю начать с сопла.
I like to start from nuzzle.
Выворачиваем концы пузыря всторону сопла.
Roll the ends bubble toward the nozzle.
Свяжите вместе сопла белых шариков.
Tie together nozzles of white balloons.
Вот, видите, у робота здесь направляющая пластина.
Then I was so happy that I kept playing with the robot, and so you see the robot has a front rudder here.
Отмерьте размер начиная от сопла шарика.
Mark the point starting from the nozzle.
Свяжите сопла обоих шариков в узел.
Tie nozzles of both balloons in one knot.
Делаем пузыри начиная от сопла шарика.
You twist bubbles starting from mouth end of the balloon.
Сложите шарик примерно 5см от сопла.
Fold balloon a couple inch away from the nuzzle.
Завяжите узел около 3см от сопла.
Tie a knot about one inch away from the nozzle.
Я начну крутить пузыри от сопла шарика.
I am going to start twisting bubbles from nuzzle end of the balloon.
Давайте завяжем сопла 2 шариков в узел.
Let's tie nozzles of two balloons in one knot.
Свяжите сопла 2 шариков в один узел.
Tie nozzles of two balloons in one knot.
Сввяжите сопла обоих шариков в один узел.
Tie the nozzles of both balloons in one knot.
Свяжите сопла обоих шариков в один узел.
Tie nozzles of both balloons together in one knot.
Чашечка приспособленна для удобства крепления сопла шарика.
The cup is designed to easy tie a knot or nuzzle of the balloon
Давайте свяжем сопла обоих шариков в один узел.
Let's tie nozzles of both balloons together.
Обычно мы крутим пузыри начиная от сопла шарика.
Usually we make bubbles starting from the nozzle of the balloon.
При такой температуре шарик обычно раздувается возле сопла.
In this temperature balloon inflates most likely at the nozzle.
В предыдущем примере мы связали сопла 2 шариков.
In previous example we tie nozzles of two balloons.
Обычно мы крутитим пузыри начиная от сопла шарика.
Generally we start twisting bubbles from the nozzle end of the balloon.
Пластина закрепляется и свободный конец ленты загибается под углом 90 .
Fix the plate and fold back the free end of the tape at 90 deg.
пластина закрепляется, и свободный конец ленты загибается под углом 90 .
Fix the plate and fold back the free end of the tape at 90 .
Как всегда, мы начнём крутить шарики от сопла шарика.
As always, we are going to twist bubbles starting from nozzle end of the balloon.
Давайте свяжем сопла всех 4 шариков в один узел.
Let's tie nozzles of all four balloons in one knot.
Просто вставьте сопла ненакаченных шариков между пузырями нижней конфеты.
Just force nuzzles of flat balloons from the bottom Between bubbles of the bottom lollipop
Как обычно, мы начинаем крутить пузыри от сопла шарика.
As usually we start twisting bubbles from nozzle end of the balloon.
Как обычно мы начнём крутить шарики от сопла шарика.
As usually we will start twisting bubbles from nuzzle end of the balloon.
Мы должны связать сопла обоих шариков в один узел.
We have to tie nuzzles of both balloons in one knot.
Между спиной манекена и спинкой сиденья помещается пластина толщиной 25 мм.
The belt assembly shall be attached to the manikin in Annex 7 to this Regulation as follows a board 25 mm thick shall be placed between the back of the manikin and the seat back.
На поясе были закреплены два небольших сопла, направленных вертикально вниз.
Two small nozzles were affixed to the belt and directed vertically downward.
P Cool сопла позиции, и так далее, эти изменения фиксируются
P Cool nozzle positions, so on and so forth, those changes are all captured
В нормальном случае мы скручиваем пузыри начиная с сопла шарика.
Normally we inflate and twist balloons from the nuzzle.
Нам нужно передвинуть пузырь от сопла в противоположный конец шарика.
We have to move the bubble away from the nozzle to the opposite end of the balloon.
Перекачайте пузырь в противоположный конец шарика в сторону от сопла.
Force the bubble to the opposite end of the balloon away from the nozzle.

 

Похожие Запросы : вода сопла - держатель сопла - масло сопла - вставка сопла - мульти сопла - температура сопла - клей сопла - картридж сопла - Ориентация сопла - щетка сопла - туман сопла - трубка сопла